Mapei Mapelastic (Powder + Liquid) 32 kgs / Set
PHP3,500.00
Tax included
AVAILABLE UPON REQUEST
Typical Applications
• Waterproof protective coatings for concrete surfaces subject to chemical attack by, for example, de-icing salts and sulphates
• Flexible waterproof protection of rendered surfaces
• Waterproof protective covering for earth-retaining walls
• Flexible protection of small section concrete structures which are, therefore, subject to deformation under load (eg. prefabricated structures)
• Waterproof membranes laid under internal and external ceramic tile floors.
| Mixing Ration (by weight) : | Packing : |
| Component A : Component B 3 kgs : 1 kg. |
Comp. A (Powder) = 24 kgs / bag Comp. B (Liquid) = 8 kgs / bag Total WT. = 32 kgs / set |
| Approximate Coverage : | Application : |
| 1.7 kgs per sq. m. per 1mm of thickness 3.4 kgs per sq. m. per 2mm of thickness 5.1 kgs per sq. m. per 3mm of thickness |
preferably by flat trowel mixing tool also required for proper mixing. |
| Approximate Area Coverage per set of 32 kgs. | Estimated price per Sq. M. |
| Thickness Area 1 mm 18.82 Sq.M. 2 mm 9.41 Sq.M. 3 mm 6.30 Sq.M. |
Thickness Price/M² 1 mm 140.81 2 mm 281.62 3 mm 420.63 |
| Use : Proper Mixing and Hand Tools |
|||
 |
 |
 |
 |
| Electric Drill 1/2" or 3/8" with Speed adjustment. Low Speed is required for mixing. |
Mixing Paddle | Finishing Trowel | 4.5L Bucket |
00158-01050
usually bought with the following products below
7 other products in the same category:
Diasen Vapostop
Price
PHP8,060.00
One-component water based primer formulated with modified-silanepolymers and designed for concrete supports. Created to increase the adhesion degree waterproofing and acrylic coatings, the product creates a vapour barrier and avoids the development of blistering phenomenon and detachments caused by moisture. It can be applied even on moist supports, it is water resistant, it has excellent anti-degradation properties of concrete surfaces and it stops the carbonation phenomenon as well
General Membrane Sagitta
Price
PHP2,733.33
This is an APP (Attactic Polypropylene) plastomeric type modified waterproofing membrane. It consists of a specially formulated bituminous compound of distilled asphalt that is modified with selected high grade visco-elastic polymers and inert filler. APP material has a very good heat stability, very high softening point and good workability, specially in sub-tropic and tropic climate (like the Philippines). It can also be used in the exposed roofing system.
Diasen WATStop, Black
Price
PHP13,800.00
Epoxy-cement waterproofing (Water Barrier)Three component epoxy resin to waterproof both with negative and positive pressure, to be used as osmotic over undergorund walls, to encapsulate rising damp and to realize a vapour over moist subtract. The product is formulated with a special epoxy resin (Part A), a catalyst (part B) and special cement (part C)
Diasen Acriflex Rapido, Grey
Price
PHP22,500.00
One-component water based waterproofing with high-speed drying. Liquid and ready to use, formulated with elastomeric resins that can be applied outside, in case of low temperature and of high relative humidity level. Flexible, crack bridging and stagnant water resistant after a few hours from application. It is suitable for concrete-asbestos encapsulation, according to the current regulations in force.